This function is dedicated to adapt the transmission control unit (TCU) to the immobilizer (BCM2). For that purpose is necessary first to read the TCU. The TCU is not possible to be read by OBDII,
but is possible to read it when you connect the TCU on the table, or when you connect the AVDI to the internal CAN-Bus of the car.
To read from the internal CAN-Bus, find the orange/black and orange/brown CAN wires and make the following connection of the AVDI:
– orange/black <-> CAN-H (PIN6 of the OBDII)
– orange/brown <-> CAN-L (PIN14 of the OBDII)
– Ground <-> GND (PIN4 of the OBDII)
– 12V <-> 12V (PIN16 of the OBDII)
NOTE: This function requires internet access and software AN049 + AN050
New AVDI Interface or activate AMS is required to purchase this special functions.