This functionality covers the generation of key dumps/key programming for vehicles with;
DAS-2 – these are vehicles up to year 1998, which have an EEPROM 93C46 in the key -W124 E-Class,W140 S-Class,W202 C-Class,W208 CLK,W210 E-Class
DAS-2A – W168 A – class
DAS-2B – W163 – ML from 1998 to 2005 year.Read/Write AAM and DAS EEPROM data.Learn radio code of transmitter keys. Deactivate/Reactivate keys
DAS-3 – Generation of Dumps for programming keys for cars, which use DAS-3 system. With the IR Key Manager special function you can generate keys for the following vehicles: W203, W208, W209, W210, W211, W215, W219, W220, W230, W639. The generated dumps should be programmed in the EZS, ESL and the key. For the key all NEC processors and the following Motorola processor is supported: MA 567 880 051, 654 367 2004
Smart key programming.
Read partially data of the EIS.
Electrical Steering Lock (ESL) – Read/Write/Unlock ESL for the following vehicles: W202, W208, W209, W210, W203, W211, W219 by direct connection to the ESL module.Open/Close ESL.
Electrical Ignition Switch (EIS, K-Line) – Read ConfData of EIS modules by diagnostic connection to the EIS module.
Electrical Steering Lock (ESL, CAN) – Disable/Enable keys; Write VIN of new units; Activate/Deactivate ESL; Activate/Deactivate EZS
By OBDII – SMART key teach-in (K-Line and CAN)
“Transponder Generation” function. With this function you can program precoded transponders for the following vehicles:
– C Class (before 1998)
– E Class (before 1998)
– G Class (before 1998)
– ML W163 (1998-2005). After you program the transponder you should also program the transponder key to the Drive Authorization System by using the special function DAS-2B
Read/Update ConfData of Sensotronic Brake Control (SBC). Automatic Repair.
New AVDI Interface or activate AMS is required to purchase this special functions.